JD700/5

Amplifier

Power your entire system with this 5-channel system amplifier that combines a 4-channel full-range and monoblock subwoofer amplifier in one single, easy-to-install package. A generous feature set adds even more value.

• Channels: 5
• Operating voltage: 10.5 - 16 VDC
• In the box: JD Amplifier, 2 mm hex wrench, 2.5 mm hex wrench, 3 mm hex wrench, Documentation

Audio:

• Amplifier class: Class D
• Rated continuous (RMS) power (14.4 V input @ 4 Ω < 1% THD): Main: 4x 75 W; Sub: 1x 180 W
• Rated continuous (RMS) power (14.4 V input @ 2 Ω < 1% THD): Main: 4x 100 W; Sub: 1x 300 W
• Rated continuous (RMS) power (12.5 V input @ 4 Ω < 1% THD): Main: 4x 60 W; Sub: 1x 180 W
• Rated continuous (RMS) power (12.5 V input @ 2 Ω < 1% THD): Main: 4x 90 W; Sub: 1x 300 W
• Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Main Channels: > 104 dB
• Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Subwoofer Channel: > 80 dB
• Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Main Channels: > 84 dB
• Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Subwoofer Channel: > 60 dB
• Damping factor @ 4 Ω: > 150/50 Hz
• Damping factor @ 2 Ω: > 75/50 Hz
• THD+N @ Rated Power: Main Channels: < 1% @ 2 Ω per Channel
• THD+N @ Rated Power: Subwoofer Channel: < 1% @ 2 Ω per Channel
• Frequency response (+0, -1 dB): 12 Hz - 22 kHz
• Frequency response (+0, -1 dB): Main Channels: 12 Hz - 22 kHz
• Frequency response (+0, -1 dB): Subwoofer Channel: 7 Hz - 500 Hz
• Input voltage range @ RCA inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
• Fuse rating: 40 A
• Recommended fuse type(s): AFS, AGU or MaxiFuse™
• Min. copper power / Ground wire gauge: 4 AWG wire
• Protection circuits: Input under/over voltage, Over temperature, Output short circuit

Signal Processing:

• Filter mode(s): Channels 1 & 2: Off, Low-pass or High-pass x10
• Filter Slope(s): Channels 1 & 2: 12 dB/octave
• Filter frequency range: Channels 1 & 2: 50 Hz - 500 Hz (x10: 500 Hz - 5 kHz)
• Filter mode(s): Channels 3 & 4: Off, High-pass or Bandpass
• Filter Slope(s): Channels 3 & 4: 12 dB/octave
• Filter frequency range: Channels 3 & 4: 50 Hz - 500 Hz
• Filter mode(s): Subwoofer Channel: Off or Low-pass only
• Filter slope(s): Subwoofer Channel: 12 dB/octave
• Filter frequency range: Subwoofer Channel: 50 Hz - 500 Hz
• Bass boost: Yes
• Bass boost EQ (0 to +12 dB @ 45 Hz): Yes
• Remote level control: Optional (RBC-1)
• Remote level modes: Sub Channel only
• Channel input mode switch: yes (2/4/6 Channels)